Snap Ring

A circlip (a combination of ‘circle’ and ‘clip’, and pronounced thus), or snap ring is a type of fastener consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to prevent lateral movement. There are two basic types: internal and external, referring to whether they are fitted into a tube or over a shaft. Circlips are often used to secure pinned connections.

Circlips which are fitted may be removed with a pair of needle-nosed pliers or a special snap ring tool if the circlip is designed to include entry points for the pliers or tool. Alternatively, cautious leverage with a flat-headed screwdriver may be necessary in lieu of the correct tools or design of snap-ring

T (Thickness): This parameter describes the Thickness of Sheet Or Strips.
W (Width): This parameter describes the Width of Sheet or Strips.
De (External Diameter): External diameter at large end of the spring. Tolerance for this parameter is (+-)2%(indicative).
Ds (Smaller Internal Diameter): Internal diameter at small end of the spring. Tolerance for this parameter is (+-)2%(indicative)
H (Height ): Height of Snap Ring.
Translate »

Powered by themekiller.com